Raw Vertical Mill
The raw vertical mill is one kind of roller mill that is equipped with 4 rollers. The grinding roller, rocker arm, support structure and hydraulic system constitute the grinding power unit, which is divided into 4 groups and is arranged around the grinding disc.
In the technical and economic viewpoint, the raw vertical mill is very advanced grinding equipment, compares with the traditional grinding equipment, it has the following advantages:
―Can be used for grinding various materials
―Small floor space
―Low per unit power consumption
―Easy adjustment
―Quick control response
―Superior dry method grinding capability
―Convenient maintenance (wear part can be replaced without disassembling the mill)
―Low level vibration from the start up to shutdown
―Low level noise
―Adaptable
Compared to other brands, this mill also has the advantages of simple structure and light weight.
|
SPECIFICATION |
NOMINAL CAPACITY |
GRINDING DISC DIAMETER |
MAXIMUM FEED SIZE |
REDUCER |
MOTOR |
||
|
TYPE |
SPEED RATIO |
TYPE |
POWER |
||||
| Raw Vertical Mill | |||||||
| φ4.6 | 210 | 4600 | 0~80 | JLP250-WX1 | 36.36 | YRKK800-6 | 2600 |
| φ5.4 | 380-425 | 5400 | 0~80 | JLP400 | 39.72 | YRKK900-6 | 4500 |
Related products
-
Roller Press
The roller press is the new grinding equipment developed in mid-1980s.The new extruding and grinding technology mainly composed of it has a remarkable effect in energy saving, and it received great attention from the international cement industry. It has become a new technology in the development of grinding technology. The machine adopts the working principle of low energy consumption of high-pressure material layer and adopts the working mode of single particle cru...
-
Cement vertical mill
The cement mill is the equipment that for grinding cement raw materials. The working principle as follows: the raw materials is fed into the feed duct through three in a row air-lock valves,and the feed duct extends into the interior of the mill through the side of the separator. The materials falls onto the center of the grinding disc by the impact of the gravity and air flow. The grinding disc is firmly connected to the reducer and rotates at a constant speed. The constant speed of the grin...
-
Slag vertical mill
Slag vertical mill is a negative pressure air sweeping type grinding equipment, which will dry the slag and grind the slag. The slag ground by the grinding roller on the grinding disc is composed of two parts: a small part of new slag with high water content and most of the ground non-finished slag with lower water content. This part of non-finished slag is the coarse material returned after separation by the separator because of the larger particles. The strong negative pressure wind caused ...
-
Cement mill
JLMS roller mill is used for the pre-grinding of cement clinker. Its working principle is: clinker enters the mill through the center chute: the material falls to the center of the grinding disc by gravity. The grinding disc is firmly connected to the reducer and selects the rotation at a constant speed. The constant-speed rotation of the grinding disc distributes the ground material evenly and horizontally on the lining plate of the grinding disc, where the tire-type grinding roller bites th...
-
Coal vertical mill
JGM2-113 coal mill is the medium speed roller type coal mill. Its pulverizing parts constitute a rotating ring and 3 grinding rollers that roll along the grinding ring, and the rollers are fixed and each can revolves on its axis. To be pulverized raw coal falls on the grinding ring from the central coal drop duct of the mill and the rotating grinding ring moves the raw coal to the grinding ring raceway with the centrifugal force.The raw coal is pulverized by the roller.The three grinding roll...
-
Grinding roller
Material Standard GB, EN, DIN, ASTM, GOST, JIS, ISO Material Processing Forging, Casting, Welding Heat Treatment Annealing, Normalizing, Q&T, Induction Hardening Machining Tolerance Max. 0.01mm Machining Roughness Max. Ra 0.4 Module of Gear 8-60 Accuracy of Teeth Max. ISO Grade 5 Weight/Unit 100kgs – 60 000kgs Application Mining, Cement, Construction, Chemical, Oil Drilling, Steel Mill, Sugar Mill and Power Plant Certification ISO 9001
