We provide high quality

equipment and materials

  • kiln support roller

    kiln support roller

    Size and weight Name Size Weight KG Kiln support roller Ф1400×900 10100 2. chemical component: - The material:GS-28Mn6N TGL14395/02 C% 0.25-0.32 P(max)% 0.40 Si% 0.20-0.40 S(max)% 0.40 Mn% 1.40-1.70 The material:25CrMo4 EN10083-1 C% 0.22-0.29 P% ≤0.035 Si% ≤0.40 S% ≤0.045 Mn% 0.60-0.90 Cr% 0.90-1.20 Mo% 0.15-0.30 The material:ST60-2-TGL 7960 C% 0.38-0.49 P% ≤0.045 Si% 0.17-0.37 S% ≤0.045 Mn% 0.50-0.80 Cr% ≤0.30 Ni% ≤0.30 Cu% ≤0.30 The mat...

  • Permanent magnet direct-drive electric roller

    Permanent magnet direct-drive electric roller

    band width (mm) length (mm) diameter (mm) power (KW) torque (KNm) tape speed (m/s) 500 650 500 5.5-11 0.54-1.09 2.5 650 800 500、630 5.5-45 0.54-5.65 1.25-2.5 800 950 500~800 5.5-132 0.43-16.72 1-3.15 1000 1150 500~1400 7.5-500 0.46-69.96 1-5 1200 1400 500~1400 15-630 0.74-88.16 1-5 1400 1600 800~1400 550710 4.39-99.35 1-5 1600 1800 1000~1400 110-800 11-111.94 1-5

  • Rotary kiln

    Rotary kiln

    The shell of rotary kiln is made of steel plate, the interior of the kiln shell is lined with refractory,  there is a specified angle between the shell and the horizontal line,and the shell is supported by 3 tyres with each retaining supporting device. A big girth gear is fixed on the kiln feed inlet tyre by a tangential spring plate ,and a pinion meshes with it below.In normal operation, the main drive motor transmits power to the open gear device through the main reducer to drive the rotary...

  • Cement mill

    Cement mill

    JLMS roller mill is used for the pre-grinding of cement clinker. Its working principle is: clinker enters the mill through the center chute: the material falls to the center of the grinding disc by gravity. The grinding disc is firmly connected to the reducer and selects the rotation at a constant speed. The constant-speed rotation of the grinding disc distributes the ground material evenly and horizontally on the lining plate of the grinding disc, where the tire-type grinding roller bites th...

  • Cement vertical mill

    Cement vertical mill

    The cement mill is the equipment that for grinding cement raw materials. The working principle as follows: the raw materials is fed into the feed duct through three in a row air-lock valves,and the feed duct extends into the interior of the mill through the side of the separator. The materials falls onto the center of the grinding disc by the impact of the gravity and air flow. The grinding disc is firmly connected to the reducer and rotates at a constant speed. The constant speed of the grin...

  • Slag vertical mill

    Slag vertical mill

    Slag vertical mill is a negative pressure air sweeping type grinding equipment, which will dry the slag and grind the slag. The slag ground by the grinding roller on the grinding disc is composed of two parts: a small part of new slag with high water content and most of the ground non-finished slag with lower water content. This part of non-finished slag is the coarse material returned after separation by the separator because of the larger particles. The strong negative pressure wind caused ...

  • Grinding roller

    Grinding roller

    Material Standard GB, EN, DIN, ASTM, GOST, JIS, ISO Material Processing Forging, Casting, Welding Heat Treatment Annealing, Normalizing, Q&T, Induction Hardening Machining Tolerance Max. 0.01mm Machining Roughness Max. Ra 0.4 Module of Gear 8-60 Accuracy of Teeth Max. ISO Grade 5 Weight/Unit 100kgs – 60 000kgs Application Mining, Cement, Construction, Chemical, Oil Drilling, Steel Mill, Sugar Mill and Power Plant Certification ISO 9001

  • Roller Press

    Roller Press

    The roller press is the new grinding equipment developed in mid-1980s.The new extruding and grinding technology mainly composed of it has a remarkable effect in energy saving, and it received great attention from the international cement industry. It has become a new technology in the development of grinding technology. The machine adopts the working principle of low energy consumption of high-pressure material layer and adopts the working mode of single particle crushing in groups. After the...

Trust us, choose us

About Us

Brief description:

Tangshan Jidong Mechanical and Electrical Equipment Co., Ltd is a comprehensive production service-oriented company, it is joint venture by Tangshan Jidong Equipment & Engineering Co., Ltd and Tangshan Jidong Cement Co., Ltd. It is the hosting platform of systematic integration.

Participate in exhibition activities

EVENTS & TRADE SHOWS

  • The bag filter bag fai...

    The filter bag is the core filtration element of bag filter, the quality of bag decides the quali...

  • A solution to the vert...

    1   The problem to be solved The vertical mill roller lubricant leakage always occurs inside the ...

  • The cause analysis for...

      In the production process of raw material turn-to clinker, the air flow temperature inside...

  • Cleaning machine manual

    1、 Overview The problem of clearing the material storage is a historical problem that perplexes ...

  • The causes and prevent...

    Regarding the support of the rotary kiln, the support rollers work with tyres and cushion plates ...

  • The research and devel...

    Recently, the sludge mechanical drying equipment R & D and resource disposal system developme...

  • 8~H(VCA9ME)DA_ZFH`DQ$08
  • }P8$4(J]BD_9_F_A({4}MM9
  • NO_9~N2GY5J(4Q]_M4ADJ)7
  • ~L[_FS3[)7U1U)M33W0EAYY
  • HI0H[WUQ3D{8{ZT@6T~K3)4
  • H`}UYI0~DF9}OG~TOPEJ1R9
  • 9E}A2~Z0WO]~6@E6N_C6WG4
  • {5[_4$3`F99T[43ADJTZE@O