Rotary kiln
The shell of rotary kiln is made of steel plate, the interior of the kiln shell is lined with refractory, there is a specified angle between the shell and the horizontal line,and the shell is supported by 3 tyres with each retaining supporting device. A big girth gear is fixed on the kiln feed inlet tyre by a tangential spring plate ,and a pinion meshes with it below.In normal operation, the main drive motor transmits power to the open gear device through the main reducer to drive the rotary kiln.
The materials are fed and burned inside the kiln through the kiln inlet( the higher end of the shell). Due to the kiln tilt and slow rotation of the kiln, the materials rolls along the circular direction and moves along the axial direction (from the higher end to the lower end), continuing to process of decomposition and burning. In the end, the clinker is produced and passes through the kiln outlet hood and cooled inside the clinker cooler.
|
PRODUCT NAME |
SPECIFICATION |
OUTPUT(T/D) |
SPEED (r/m） |
NUMBER OF SUPPORT |
REDUCER |
MOTOR |
||
|
TYPE |
NOMINAL SPEED RATIO |
TYPE |
POWER |
|||||
|
ROTARY KILN |
∅4×60M |
2500 |
0.41-4.1 |
3 |
ZSY630-31.5-Ⅴ |
31.5 |
ZSN4-355-092 |
315 |
|
ROTARY KILN |
∅4×60M |
2500 |
0.396-3.96 |
3 |
ZSY630-35.5-Ⅰ |
35.5 |
ZSN4-355-092 |
315 |
|
ROTARY KILN |
∅4.3×60M |
3200 |
0.43-4.3 |
3 |
YNS1400-28VIDL |
28 |
ZSN4-355-12 |
420 |
|
ROTARY KILN |
∅4.3×64M |
3000 |
VFD,MAX.4 |
3 |
H3SH19-28 |
28 |
YPT500-8 |
450 |
|
ROTARY KILN |
∅4.3×66M |
3200 |
0.4-4.3 |
3 |
ZSY710-35.5-Ⅱ | 31.5 | ZSN4-355-12 | 420 |
|
ROTARY KILN |
∅4.8×72M |
5000 |
0.447-4.47 |
3 |
YNS1760-28VDR |
28 |
ZSN4-450-092 | 710 |
|
ROTARY KILN |
∅4.8×72M |
5000 |
0.396-3.96 |
3 |
JH800C-SW306-31.5 |
31.5 |
ZSN4-400-22 |
630 |
Related products
-
Raw Vertical Mill
The raw vertical mill is one kind of roller mill that is equipped with 4 rollers. The grinding roller, rocker arm, support structure and hydraulic system constitute the grinding power unit, which is divided into 4 groups and is arranged around the grinding disc. In the technical and economic viewpoint, the raw vertical mill is very advanced grinding equipment, compares with the traditional grinding equipment, it has the following advantages: ―Can be used for grinding various materials ―Small ...
-
Cement vertical mill
The cement mill is the equipment that for grinding cement raw materials. The working principle as follows: the raw materials is fed into the feed duct through three in a row air-lock valves,and the feed duct extends into the interior of the mill through the side of the separator. The materials falls onto the center of the grinding disc by the impact of the gravity and air flow. The grinding disc is firmly connected to the reducer and rotates at a constant speed. The constant speed of the grin...
-
170kV station porcelain post insulator meets cu...
The Main products include AC and DC 10kV-1100kV solid-core post porcelain insulator, the annual output of 110kV and above is more than 180,000 pieces, and the insulator output and market share have been always front rank in the post insulator industry in China for many years. Our Products are mainly used in UHV power stations. 1. we are an insulator supplier of State Power Grid, The Southern Power Grid and major High-Voltage power equipment manufactures in China, a...
-
kiln nose is China’s high-quality heat-re...
The materials in the rotary kiln will be discharged outwards with the inclination of the kiln body after the calcination is completed. The discharge outlet is usually located at the kiln head of the rotary kiln. Therefore, the kiln head guard plate should be reinforced at the kiln head. The main function of the kiln head guard is to fully protect the kiln head cylinder from burning, corrosion and deformation, and to protect and extend the service life of the kiln hea...
-
220kV station porcelain post insulator is very ...
The Main products include AC and DC 10kV-1100kV solid-core post porcelain insulator, the annual output of 110kV and above is more than 180,000 pieces, and the insulator output and market share have been always front rank in the post insulator industry in China for many years. Our Products are mainly used in UHV power stations. 1. we are an insulator supplier of State Power Grid, The Southern Power Grid and major High-Voltage power equipment manufactures in China, a...
-
Roller Press
The roller press is the new grinding equipment developed in mid-1980s.The new extruding and grinding technology mainly composed of it has a remarkable effect in energy saving, and it received great attention from the international cement industry. It has become a new technology in the development of grinding technology. The machine adopts the working principle of low energy consumption of high-pressure material layer and adopts the working mode of single particle cru...
